Showing posts with label hobby timber. Show all posts
Showing posts with label hobby timber. Show all posts
27 August 2021
Router bench
I finally mounted the router into one of my stainless benches. I chucked the old table as it was made decades ago from lumber I pulled from a construction site bin.
Garrick made a pinball gizmo from one of those mail-order-activity-kits. It's pretty good.
One of my last remaining Ryobi tools. Like my drill-press, it's seen barely any use compared to my other tools, and has been kludge-repaired extensively just to keep it going. Anyone else would have thrown it (and my press) away by now. Ryobi is truly the worst brand I've ever experienced in tools. Seriously, harbour-freight-esque' is superior.
Labels:
hobby timber
10 August 2020
Camper Cabinet slow progress Pt4.
Slow progress as usual. Corona kicked everything in the teeth...and it's winter and cold and glue-ups for this job have been complicated. :(
The inside of the curved drawers have been skinned though not shown here. There's lots of trim work to do, and some design errors that I messed up due to radical changes part way through after my initial design went off the rails. I'll retro-fix a bunch of visible problems with some fancy trim or detailing of some sort...will work something out I guess. More work. :(
The inside of the curved drawers have been skinned though not shown here. There's lots of trim work to do, and some design errors that I messed up due to radical changes part way through after my initial design went off the rails. I'll retro-fix a bunch of visible problems with some fancy trim or detailing of some sort...will work something out I guess. More work. :(
Labels:
campervan,
hobby timber
26 July 2020
Recovery tracks and camper levelers at discount prices.
I had a fiasco getting the van up the ramps and into the back yard to continue work on the camper. The ground was so wet that I couldn't even drag the front wheels over the curb, let alone get a run-up to get the van up the ramps. I spun up the nature strip and just plain made a mess.
I called Supa-Dave and borrowed his hands and Recovery Tracks simply to get the van over a flat surface!!
I really wanted a set of chocks to level the van when parked anyway, and now I need some recovery tracks just to get the camper in and out of the back yard...let alone explore in the wild. Recovery Tracks are ludicrously expensive at ~$200+ for a pair, and cheap ones are still ~$70.aud/pair on ebay.
Recovery tracks vary from 700mm through to 1100mm. I'm cutting the difference and going for 900mm each. It's $10.50 for a 200x50x1800mm treated pine sleeper. I think I can afford that.
I want a 30 degree cut for the ramp slope, but my circular saw blade just isn't large enough, and it doesn't tip 60 degrees sideways to complete the cut from the other side.
My table saw cuts a little deeper...but not much...
Bow saw finishes the job.
I'm going to cut some tread into the track. My round-over-bit happened to be in the router already so I ran it over the whole thing...rough cut sleepers are splintery anyhow...
I guess some tread depth about "this deep" will do...I dunno...seems good.
That seems pretty good.
I should do the bottom too...friction works both ways.
I cross cut some grooves to add to the grip-ology on both sides.
Now I have the world's cheapest recovery tracks and camper leveling chocks at $5.25 each!! That's a win in my books.
Ooof that truck tyre makes the track look small!
Labels:
campervan,
hobby timber
03 November 2019
New fence, new gate.
A new fence was installed between our property lines on the western edge of the house. A new gate wasn't part of the deal so I whipped up a new one from some treated pine and Garrick helped me install it. The old gate was mounted onto a brick pillar that took up much of the available space. It was cracked at the base and was leaning into the neighbours yard so I knocked it over before the fencing guy built the new fence.
Labels:
hobby timber
22 April 2019
Dining table, hard rubbish style
Found a really nice solid timber dining table on hard rubbish. Yet another absurd find on the side of the road. This is easily repairable and has the classic look that everyone wants. It's clearly a student project and had many indicators of the classroom.
...So I bolstered it with dowel pins and glue throughout, fixed some split timber and pinned those with more dowels, and repositioned some table-top fasteners that had shifted completely out of usefulness due to timber shinkage over the years.
The top has been belt-sanded by a barbarian and then coated with combination varnish-stain...the worst timber finish ever. Don't use that stuff, it ALWAYS looks terrible. Use separate products; a stain, THEN a varnish.
I'm putting this table into the spare room as a hobby-bench as we already have a nice small dining table in the kitchen. As such, the goofy finish and whacky sanding underneath is going to remain...still looks pretty good though.
Previously had wood-screws into end grain. What a derp. Fixed with dowels and glue.
Oh I also found some carpet underlay in a different hard rubbish pile. This happens to be precisely what I need for the van underlay. Saved me ~$25bucks/meter for regular automotive underlay, there're a few meters here.
The width on the larger piece is the width between foot-steps. Handy.
This piece had some nasty splits across some of the joinery holes, so it took x5 very long dowel pins to get some strength back into it.
Table-top fasteners floating out in space doing nothing. I repositioned these.
Looks pretty good. Item #3431234 of my hard rubbish finds in Australia.
Labels:
hard rubbish,
hobby timber
18 December 2018
More Christmas Bowls.
It must be nearing Christmas...I seem to be making Star Wars bowls again...
More pics when it's done.
Previous bowls here: http://wooden-gears.blogspot.com/2015/11/fastest-food-trough-in-galaxy.html
Labels:
bowls,
hobby timber,
star wars
09 June 2018
Bedroom tablet holder
Tablets are great for watching and reading in bed. Tablets are heavier than books!! Aaarrgh my arms!!
What's this got to do with tablets or bed? Nothing!!
Cat memes forever...
Moar kitteh!!
A test arm mounted to the bed head with no tablet holder installed.
Tablet holder mounted.
The plastic knuckles are cast-off parts from a lighting component we build into a clients job at work. They're not designed for 1000mm leverage, but work great for short joints.
I need to replace this primary joint with something more substantial. I'll make something out of timber tomorrow. This failed on me during the photo-testing phase. Never mind, it was partially expected. 90% of the work is done. :)
Labels:
hobby timber
Subscribe to:
Posts (Atom)
























































